Health o meter 894KLT/895KLT Battery Replacement

Ensure Reliable Operation

Proper maintenance of your
Health o meter 894KLT Talking Digital Scale or
Health o meter 895KLT Digital Talking Scale
includes periodically replacing the batteries to ensure consistent and reliable operation. This guide will walk you through the simple steps for replacing the batteries in your talking scale.

The Health-o-Meter 894KLT and 895KLT Scales are powered by Two AAA batteries.

Health-o-Meter Talking Scale

The 894KLT and 895KLT scales are shipped without the batteries installed. The batteries are included in a small plastic bag. Follow these instructions to install batteries in a new scale or replace batteries in your current scale.

What You’ll Need

  • Two (2) new AAA batteries

Health o Meter 894KLT/895KLT Scale
How to Replace / Insert Batteries

Open Battery Compartment

The battery compartment is located on the underside of the scale. To open the battery compartment cover, push the battery compartment tab to the right and lift upwards.

Health-o-Meter 894KLT 895KLT Battery Compartment Cover

Install Batteries

Install two new AAA batteries. Health-o-Meter recommends using alkaline batteries. Do Not use zinc carbon batteries.

Follow the battery illustration to ensure the batteries are inserted in the proper direction.

Health-o-Meter 894KLT 895KLT Battery Compartment

Close the Battery Compartment Cover

To close the battery compartment, slide the end of the cover into the battery compartment. Then push down the tab and compartment cover to ensure the cover is firmly attached. A screw is not required to close the battery compartment. You may use the screw to further secure the battery compartment if desired. Do not use the scale with out the battery compartment cover attached.

Health o meter 894KLT 895KLT Battery Cover

Turn Scale On

Ensure all objects are removed from the scale’s platform, and then firmly tap the scale on with your foot in the center of the scale. Four digits will appear on the display. Wait for 0.0 to appear on the display. The scale will state when it is ready. Step on the scale until weight is displayed and announced.

Always use high-quality AA batteries for longer-lasting performance.


Avoid mixing old and new batteries to ensure consistent power delivery.

Warning: If the scale will not be used for some time, remove the batteries to avoid a safety hazard.

Disposal of batteries must be performed in accordance with the prevailing national, regional or local regulations which apply

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *